HIGH PRESSURE BLADDER TYPE ACCUMULATORS
MAIN FEATURES
Operating Principle
Due to the compressibility of the gas, nitrogen, the bladder accumulator enables to stock and return a liquid under stored pressure.
Your Benefits
To increaseyour production rates thanks to large instantaneous flow rates that only accumulators can provide.
• Some spare power available at any time.Example : EHV 50-330/90 Average flow : 650 L/mn
Maximum Pressure Available : 320 Bar
Minimum Pressure Available : 250Bar
Average Power = Average flow x Average Pressure/600 = 308 kW
• The accumulators ability to run independdently moderates its installation cost while reducing your equipment running cost.
TECHNICAL CHARACTERISTICS
This accumulator comprises a forged steel shell, a fluid port assembly and a rubber bladder compatible with a large number of fluids. It’s special design allows the bladder (the strategic component) to compress and deform into 3 lobes in order for the accumulator to store, then to deliver the fluid under pressure, as required.
The following technical characteristics are common to all type of accumulators.
• Min./Max. working temperature acceptable (°Celsius) : - 40/+150 following the constructions• Shell material : Alloyed steel
• Rubber compound NBR, IIR, EPDM etc.
• Protections : Bare metal, electro-chemical coating, epoxy resins, PTFE.
EHV Range from 0.2 to 10 litres (Range 350 Bar)
