Hydraulic Shop Presses
C-Frame Presses - Single Acting | Spring Return
Features
- Open-End-Access™ design makes loading and unloading of work easy.
- Bench mount requires less than 1,4 sq. mm. of space.
- Cylinder head adjusts to three convenient working positions, providing up to 51 cm of “daylight.”
- Can be bench-mounted or mounted on optional base.
- Hydraulic cylinder delivers a 15 cm stroke and is driven by a P59 two-speed hand pump.
Technical Dimensions
Ordering Information
* SPM256C does not include No. 60846 pedestal base.
†† Typical performance based on pump specifications. Actual speeds may vary with operating conditions.
H Frame Presses - Single Acting | Double Acting
Features
- Ideal for small pressing jobs, repairing small motor armatures, removing and installing gears, bearings, other press-fit parts.
- Bench press has 391 x 457 mm work area. Floor press bed height is adjustable from 127 to 1041 mm with horizontal “daylight” of 553 mm.
- Choices of power sources include: single-speed hand pump, electric/hydraulic or air/hydraulic.
- Hydraulic gauges, hoses and fittings included.
Technical Dimensions
Ordering Information
† “Advance” position holds pressure with motor shut-off. “Return” position advances cylinder with motor running and returns cylinder with motor shut-off.†† Typical performance based on 7 bar and 700 bar pump specifications. Actual speeds may vary with operating conditions.
H Frame Economy Presses
Features
- Rugged, yet reasonably priced. Handles many “big press” tasks, and perfect for many of the “in-between” jobs you see almost daily.
- Press bed height easily adjustable with winch. Bed will not drop when handle is released.
- Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic. (Note: Stroke length limited to 159 mm on economy models).
Technical Dimensions
* Lateral head movement
Ordering Information
† Holds pressure with motor shut-off. Also has an automatic dump setting. Furnished with a 3,1 m remote motor control.
†† Typical performance based on 7 bar and 700 bar pump specifications. Actual speeds may vary under operating conditions.
‡ Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 700 bar: PE172–67/81 dBA; PE21–70; dBA measured at 0,9 m distance, all sides.
H Frame Presses - Tonnage: 100
Features : H-Frame Shop Press
- Cylinder work-head glides across upper frame on rollers, locks in place for off-center pressing jobs. May be used horizontally for special pressing applications with user-supplied supports.
- Press bed is raised and lowered by winch which locks in place for insertion of bed retaining pins. Upper bolster can be lowered 203 mm for convenient positioning on repetitive jobs.
- Generous “daylight” of 1067 x 1270 mm accommodates bulky work pieces, uprights are placed for easy side entry of bars or shafts for straightening or bending.
- Choice of single or double-acting cylinder. Hydraulic pump options include: 2-speed hand pump with large 7,6 l reservoir, PE172 electric/hydraulic pump or “PQ” series “Quiet” electric/hydraulic pump with low noise level.
Technical Dimensions
* Lateral head movement
Ordering Information
† Solenoid valve with 24V remote control hand switch.
†† Typical performance based on 7 bar and 700 bar pump specifications. Actual speeds may vary under operating conditions.
‡ Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 700 bar: PE172—67/81; PQ60—74/76; PQ120—73/78. Measured at 0,9 m distance, all sides.
NOTE: Frame is shipped assembled.
H Frame Presses - Tonnage Range: 150-200
Features : H-Frame Shop Press
- Standing 2,3 m tall, these giants handle the really big jobs.
- May be used horizontally for special pressing applications with user-supplied supports.
- Work-head has wide horizontal travel. Rugged press frame withstands load of rated capacity across full width of frame.
- Winch mechanism provides easy positioning of press bed, locks in place for insertion of retaining pins.
- Upper bolster can be lowered 279 mm for convenient positioning on repetitive jobs.
- Uprights are placed for easy side entry of bars or shafts for straightening or bending.
- Fast cylinder approach is provided by PQ1204S “Quiet” electric/hydraulic pump.
- Remote control hand switch, enables operator to view work from all sides with fingertip control of cylinder piston travel.
.png "H-frame-SPE10013DS-(2).png")
Technical Dimensions
* Lateral head movement
Ordering Information
† Solenoid valve with 24V remote control hand switch.
† Typical performance based on 7 bar and 700 bar pump specifications. Actual speeds may vary under operating conditions.
‡ Pump standard with press. dBA at idle and 700 bar: 73/78, measured at 0,9 m distance, all sides.
NOTE: Frame is shipped assembled.
Know More: https://www.spxflow.com/en/power-team/pc-presses/
