Universal Pullers - 50 Ton and 100 Ton
Enforcer 55
1. Puller can be assembled in 2 or 3 jaw configurations.
2. Hydraulically-actuated jaws allows cylinder to move in or out with a safe, secure grip on workpiece.
3. Hydraulic lift system for easy, precise position of puller
4. Unique dual pump arrangement. Low pressure pump positions, holds and opens jaws. The high pressure pump advances and retracts the pushing cylinder without releasing clamped jaws.
5. Swivel casters give ease of mobility
6. Large wheels make movement of cart easy
7. Super Lock-Jaw™ feature means the harder the pull, the tighter the puller jaws grip. No chains or cages required to keep puller jaws from slipping or springing off the part being pulled.
8. Guards at pinch points protect operator
9. Puller can be mounted on cart 90 degrees to right or left of puller cart centerline, permitting use in tight quarters, such as between machinery.
10. Self-centering design puller jaws will automatically grip work evenly.
11. Choice of cylinder with a 169 mm or 337 mm stroke.
Ordering Information
* Cart and Puller (cart width = 813 mm)
Enforcer 100
1. Adjustable jaws mean they always pull on a flat surface. Retaining chain holds jaws in place during positioning.
2. Lock-Jaw™ feature means jaws grip progressively tighter as more pulling force is applied.
3. 100 ton hydraulic cylinder is single-acting, spring return type with a maximum working pressure of 700 bar.
4. Lifting bracket allows puller to be lifted if the workpiece center is more than 914 mm off the floor
5. Adjusting screw allows operator to move vertical position of the puller
6. Spring loaded feature means Enforcer 100 will align itself on uneven pulls.
7. Hydraulic pump is a 2-stage, high pressure unit controlled by remote hand switch with 7,6 m cord.
8. Tow bar provides puller with plenty of mobility.
9. Pushing adapters have a diameter of 105 and 63,5 mm.
Ordering Information
Know More: https://www.spxflow.com/en/power-team/pc-pullers/
